Good Pool Maintenance Habits

Good Pool Maintenance Habits

The pool is often the crown jewel of the homeowner or a burden that is merely just an appealing nuisance. The proper maintenance of your pool will benefit the well-being of your pool as well as your family and friends and also your wallet. While the benefits of proper pool maintenance are plentiful, the requirements to perform the necessary maintenance are simple.

Here are five methods you can ensure a safe, functional swimming pool.

 

Chlorinate the water

The proper use of chlorination is among the most basic ways to clean your pool. Chlorine cleans the water and stops the spreading of harmful bacteria in the form of bacteria. It also helps prevent the growth of different algae that cause discoloration of the pool of the water and can cause uncomfortable swimming conditions. A level of safe 3-4 parts of chlorine per million parts of water (1-3 per milliliter) is believed to be enough to prevent microbial growth. The pool owners must apply chlorine manually, based on the volume of the pool and the amount of chlorine that pool owners will offer.

 

Test the pool regularly.

Chemicals in the water go beyond chlorination. By regularly testing your water quality, it is possible to detect other potential hazards like:

  • Alkalinity: Alkaline levels that are too low or high cause cloudy water. The alkalinity recommended for swimming pools is between 80 and 120 ppm.
  • pH: An imbalance in pH could cause equipment in the pool to wear out and create algae growth. It is suggested that your swimming pool’s water is measured in the range of 7.4-7.6 on the pH scale.
  • Chlorine: Read the instruction manual for your pool’s appropriate levels of chlorine. A high concentration of chlorine can harm swimmers’ skin. In contrast, the insufficient amount of chlorine allows the microbes and bacteria to grow. The suggested level is usually 3 to 3.5 parts per million.
  • Too much or low calcium hardness may harm the pool liner and lead to calcium deposits. The recommended calcium hardness range is 200-400 ppm.
  • Phosphates: Basically stated, are organic compounds that enter the pool through all kinds of things from sweat to leaves. A small quantity (100-125 ppm) will help soften the pool water. Still, in greater quantities, it can lead to algae blooms as well as water discoloration.

Test kits to test the pool can do an excellent job of testing the water’s chemical content. They should be utilized every week to ensure that the pool is kept secure.

 

Shocking the pool

The idea of shocking your pool is a typical way to treat the water in your pool when it is chemically unbalanced. The term “shock” refers to adding chlorine or non-chlorine pool chemicals that remove any bacteria, algae, or chloramines (which are formed when chlorine reacts with nitrogen from contaminants such as sweat). It is typically applied following a storm, algae outbreak, or heavy use. At any point, there may be a change in the balance of chemicals in your water pool has changed.

 

Make sure to run the pump in the pool

The pool pump is the main filtration device for your pool. It’s also the principal source of water circulation. The pool water has to have the ability to flow to evenly disperse chemicals. To achieve this and remove dirt and bacteria, the pump in your pool must be running for about 8 hours per day. Invest in the best submersible water pump for the job.

 

Cleanse the filter of the pool

If you are cleaning your pool filter, it’s crucial to know the kind of filter you have.

Sand filters should be cleaned whenever the pool’s water gets cloudy or when the PSI exceeds the normal levels of operation. The filter’s sand should be cleaned using a high-pressure hose and treated with a chemical every two years at a minimum.

Cartridge filters, which use cloth-like material that filters water instead of sand, can be cleaned and then sprayed using a hose with high pressure at least two times per year.

Diatomaceous earth filters, though in some circles to be better than sand filters, use a soft, crumbly sedimentary rock to filter pool water. The filters need to be washed first before spraying with a high-pressure water hose.

Good Pool Maintenance Habits

Leave a Reply

Your email address will not be published.